In the past, people usually used relatively cheap ceramic tiles to pave walls and floors in home decoration to achieve the purpose of decoration, but with the improvement of modern people's living standards and the pursuit of higher quality of life Now, the use of more cost-effective natural marble for paving in home decoration has become a new trend in the market. When choosing to use natural marble for home decoration, people usually choose white, which is a long-lasting, high-end and atmospheric color. Foshan white marble is produced in Hezhou, Foshan. With its snow-white surface, landscape-like texture and low price, it has always been the stone of choice for architectural decoration (such as interior and exterior walls, window sills, lines, floors, etc.).
Foshan white marble can be called the king of cost performance in the white series. After the home decoration wall and floor are paved, the decorative effect will give people a surprise of value for money. At the same time, the editor hereby reminds everyone that in order to achieve the most perfect effect of marble wall and floor paving, it is also a very important environment in the construction to use marble grout according to the standard process, because it will directly affect the overall aesthetics after the decoration is completed. Effect, the following editor will systematically introduce the construction specification process and key points of marble joint sealant. Decoration renderings of marble floor tiles and wall tiles First of all, marble wall paving: 1. Wet the base surface of the wall with clean water first. When the surface is dry, it can be used as adhesive construction.
2. After the marble is pasted within the specified time, the marble should be slightly twisted and rubbed up and down when pasting, or gently tapped with a mallet to make the marble and the adhesive fit closely. 3. Correct the joint between the level and the adjacent board, and pay attention to reserve a joint of 2 mm or more between the marbles. 4. Preliminary cleaning of the dirt attached to the surface of the board. The pasted marble can be cleaned and filled after 3 days. When filling the joints, a special sealant for artificial marble should be used.
5. After the caulking treatment, clean the caulking material and dirt attached to the surface of the board in time. 6. After the marble is paved, the protective film can only be torn off after acceptance and cleaning. 7. It is recommended not to use traditional marble wet-hanging construction.
Next is the marble floor paving: 1. Wet the base surface of the ground with clean water first, and use the adhesive for construction when there is no clear water on the surface. 2. Confirm that there is no clear water on the base surface, and the thickness of the special artificial stone adhesive (strip shape/full batch scraping) for batch scraping is more than 3mm. The same method is used for the back of the stone, the thickness is 2-3mm, and then the stone is pasted. 3. After the stone is pasted within the specified time (according to the requirements of the adhesive product instructions), after laying the stone, tap it gently with a mallet so that the newly pasted artificial stone can be completely bonded to the adhesive.
4. Correct the joint between the level and the adjacent board, (filler construction) pay attention to reserve a joint of 2 mm or more between the stones. 5. After 3 days after pasting the stone (according to the instructions of the special artificial stone adhesive), the seam cleaning and caulking can be carried out, and the special artificial stone caulking agent should be used when closing the seam. 6. After the caulking treatment, clean the caulking material and dirt attached to the surface of the board (do not use acid-base cleaners, it is recommended to use special artificial stone cleaners).
7. Precautions: When paving a large area, 5-8mm expansion joints should be set at an appropriate interval of 8-10 meters. 8. After the stone is paved, the film is torn off after acceptance and cleaning.