Detailed explanation of stone line processing technology

Author:MoCo Marble Tiles-Stone Tile Manufacturer

In today's era, designers often use some special-shaped stone flower lines in home decoration as the edges of door frames, window frames, handrails, tabletops, eaves, building corners, waistlines, skirting lines, etc., to achieve beautiful purposes and provide our residences Decoration adds to the splendor. Example pictures of marble line decoration effect So marble lines, a building material that can directly add decorative effects to houses after processing, are extremely popular in the market, and the market demand is very large. Then someone has to ask, how are these beautiful marble lines processed? The following editor will introduce the processing technology of marble lines: 1. Slitting Use thicker slabs to cut into different widths, and the thickness and width are determined according to the line shape.

2. Reinforcement Marble lines need to be reinforced with different materials. Reinforcement materials generally include: stainless steel bars, aluminum bars, aluminum honeycomb, artificial stone, etc. for reinforcement. Different widths, different stones, and different lines will be reinforced with different materials.

Generally, a small line of about 50mm can be added with an aluminum strip; a line of about 100mm can be reinforced with artificial stone or two aluminum strips; a line above 100mm can be reinforced with aluminum honeycomb. Aluminum honeycomb reinforcement can reduce the weight of the stone bar and make it stronger, but the cost is relatively high. When strengthening, attention should be paid to the exposed position of the stone thread, because the stone thread has the effect of closing the mouth, so the exposed position of the stone thread needs special treatment.

The machining process also requires special attention to facilitate the production while keeping it from falling off. 3. Modeling After the line is cut and reinforced, it can be modeled. The lines can be formed by passing through a gong machine or a molding machine.

If it is a curved line, use an engraving machine to carve the shape, and then cut it out with a water jet machine. 4. Fill out (on demand) After the line modeling, if there are cracks or holes, it needs to be filled out. Generally, marble glue, color paste, stone powder (or stone particles) are used for filling.

The dug and filled lines need to go through the gong machine again to fill in the filler used for the lines. 5. Glue (on demand) Filled or lighter-colored lines need to be glued. Apply glue to protect the surface of the lines and to fill in some small holes and cracks.

6. Grinding Grinding is divided into automatic grinding and manual grinding. Stone If the lines come out of the molding machine, they can directly enter the automatic grinding machine. The automatic grinding machine is divided into two parts, because the lines need to be ground first and then the other side, so two automatic grinding machines need to be connected and used together. Hand sanding is for wider and custom lines.

Due to the limitations of the machine, manual polishing is required. Generally, it is manually polished repeatedly with sandpaper to achieve sufficient brightness. 7. Shaving After a series of processes, the stone wire also needs to be shaving.

8. Packing After the marble lines are trimmed, they can be packaged and shipped. When packing, remember to wrap them with soft materials to protect the goods and reduce the probability of loss during transportation.


Porcelain Tile Manufacturer

Large Format Porcelain Tiles

Tile Trim Profiles

Porcelain Tiles Suppliers

Ceramic Tiles Manufacturers

wood look porcelain floor tiles

Marble Look Tiles

Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English